Location & approach

By Car

The campus of TU Dortmund University is located near the freeway junction Dortmund West, where the Sauerland line A45 crosses the Ruhr expressway B1/A40. The Dortmund-Eichlinghofen exit on the A45 leads to the South Campus, the Dortmund-Dorstfeld exit on the A40 leads to the North Campus. The university is signposted at both exits.

For travelling to the Department of Statistics, convenient parking places can be found at Vogelpothsweg (Gates 21 / 24) or alternatively at the Otto-Hahn-Straße (Gates 28 / 30 / 35).

By Bus or Train

TU Dortmund University has its own train station (“Dortmund Universität”). From there, suburban trains (S-Bahn) leave for Dortmund main station (“Dortmund Hauptbahnhof”) and Düsseldorf main station via the “Düsseldorf Airport Train Station” (take S-Bahn number 1, which leaves every 15 or 30 minutes). The university is easily reached from Bochum, Essen, Mülheim an der Ruhr and Duisburg.

You can also take the bus or subway train from Dortmund city to the university: From Dortmund main station, you can take any train bound for the Station “Stadtgarten”, usually lines U41, U45, U 47 and U49. At “Stadtgarten” you switch trains and get on line U42 towards “Hombruch”. Look out for the Station “An der Palmweide”. From the bus stop just across the road, busses bound for TU Dortmund University leave every ten minutes (445, 447 and 462). Another option is to take the subway routes U41, U45, U47 and U49 from Dortmund main station to the stop “Dortmund Kampstraße”. From there, take U43 or U44 to the stop “Dortmund Wittener Straße”. Switch to bus line 447 and get off at “Dortmund Universität S”.

The H-Bahn

One of the landmarks of the TU Dortmund University is the H-Bahn. Line 1 runs every 10 minutes between Dortmund Eichlinghofen and the Technology Center via Campus South and Dortmund University S, while Line 2 commutes every 5 minutes between Campus North and Campus South. It covers this distance in two minutes.

By Plane

The AirportExpress is a fast and convenient means of transport from Dortmund Airport (DTM) to Dortmund Central Station, taking you there in little more than 20 minutes. From Dortmund Central Station, you can continue to the university campus by interurban railway (S-Bahn). A larger range of international flight connections is offered at Düsseldorf Airport (DUS), which is about 60 kilometres away and can be directly reached by S-Bahn from the university station.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Contrast Deutsch

Location & approach

By Car

The campus of TU Dortmund University is located near the freeway junction Dortmund West, where the Sauerland line A45 crosses the Ruhr expressway B1/A40. The Dortmund-Eichlinghofen exit on the A45 leads to the South Campus, the Dortmund-Dorstfeld exit on the A40 leads to the North Campus. The university is signposted at both exits.

For travelling to the Department of Statistics, convenient parking places can be found at Vogelpothsweg (Gates 21 / 24) or alternatively at the Otto-Hahn-Straße (Gates 28 / 30 / 35).

By Bus or Train

TU Dortmund University has its own train station (“Dortmund Universität”). From there, suburban trains (S-Bahn) leave for Dortmund main station (“Dortmund Hauptbahnhof”) and Düsseldorf main station via the “Düsseldorf Airport Train Station” (take S-Bahn number 1, which leaves every 15 or 30 minutes). The university is easily reached from Bochum, Essen, Mülheim an der Ruhr and Duisburg.

You can also take the bus or subway train from Dortmund city to the university: From Dortmund main station, you can take any train bound for the Station “Stadtgarten”, usually lines U41, U45, U 47 and U49. At “Stadtgarten” you switch trains and get on line U42 towards “Hombruch”. Look out for the Station “An der Palmweide”. From the bus stop just across the road, busses bound for TU Dortmund University leave every ten minutes (445, 447 and 462). Another option is to take the subway routes U41, U45, U47 and U49 from Dortmund main station to the stop “Dortmund Kampstraße”. From there, take U43 or U44 to the stop “Dortmund Wittener Straße”. Switch to bus line 447 and get off at “Dortmund Universität S”.

The H-Bahn

One of the landmarks of the TU Dortmund University is the H-Bahn. Line 1 runs every 10 minutes between Dortmund Eichlinghofen and the Technology Center via Campus South and Dortmund University S, while Line 2 commutes every 5 minutes between Campus North and Campus South. It covers this distance in two minutes.

By Plane

The AirportExpress is a fast and convenient means of transport from Dortmund Airport (DTM) to Dortmund Central Station, taking you there in little more than 20 minutes. From Dortmund Central Station, you can continue to the university campus by interurban railway (S-Bahn). A larger range of international flight connections is offered at Düsseldorf Airport (DUS), which is about 60 kilometres away and can be directly reached by S-Bahn from the university station.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Industrial Data Science 2 Summer 2023

Kick-off

The first meeting will take place on April, 14th from 10.15-11.45.

Moodle

All relevant course information can be found in the Moodle room.

Description

Industrial Data Science 2, or InDaS 2 for short, is an interdisciplinary course that builds on the master's course Industrial Data Science 1. In the summer semester, students from the faculties of Mechanical Engineering, Statistics and Computer Science work on real-world data science use cases from industry. The use cases come from diverse industries, such as electronics manufacturing, the automotive industry or the chemical sector.

In the course format, which is referred to as problem-based learning, students develop independent solutions to existing real-world problems. To do this, they use their knowledge from the previous course in the winter semester and acquire new skills for solving the use cases in a systematic manner. Just as diverse as the domain are the use cases, e.g. image recognition, signal processing, time series clustering or process prediction.

The course organizes small groups of about six to eight students, each of whom deals with one of four use cases. During the semester there are three presentation dates in which interim results of the work are presented. The groups act as advisory teams and present their work in a descriptive fashion. Among others, the four professors and the use case owners from the industrial use cases take part in these meetings.

There will also be an introductory session during which the four use cases will be presented. Students are then given the opportunity to indicate a priority. The assignment of the groups is done taking this prioritization into account. In the event of a tie, the decision will be made by drawing lots.

In addition to presenting their findings during the semester, students will prepare a written report of their analysis. The work on the report is done during the semester and by each student individually.

Contact